SIMULATION AND ACQUISITION OF GPS L5 FREQUENCY SIGNAL AND COMPARISON WITH L1 SIGNAL

Authors

  • K. Latif Department of Electrical Engineering, Wah Engineering College, University of Wah, Wah Cantt., Pakistan
  • M. Usman Visiting Faculty Member, Department of Electrical Engineering, Wah Engineering College, University of Wah, Wah Cantt, Pakistan
  • A. Hanif Department of Electrical Engineering, Wah Engineering College, University of Wah, Wah Cantt., Pakistan

Abstract

Recent advances in GPS modernization efforts include transmission of L5 frequency signals. This paper emphasizes on the implementation of acquisition techniques for GPS L5 and GPS L1 signals. Both signals have been simulated and analysed in a detailed manner to obtain better acquisition results. In this context the signals have been generated, transmitted, received and acquired by suitable algorithms. Simulations were performed using Borland C++ Builder Compiler and MATLAB softwares. Results reveal that L5 signal offers many advantages, including that the acquisition peaks are more accurate, dominant and wider as compared to L1 signal, thus improving GPS system overall performance. Moreover, L5 signals reduce vulnerability to waveform deformation. Noise levels are also comparatively lower than previous signals.

References

James Bao-Yen Tsui,"Fundamentals of Global

Positioning System Receivers", 2nd edition, WileyInterscience (2005).

Spilker & Van Dierendonck 2001, GPS Receivers

in B.Parkinson and J.Spiker, Eds Global

Positioning System Theory and Applications I

American Institute of Aeronautics and Astronautics

(1996).

M.N. Venkatesh Babu and S.K. Lakshmi Narayana,

International Journal of Engineering Research and

Applications (IJERA) 2, No. 4 (2012) 2148.

S. Erker, S. Thölert, J. Furthner and M. Meurer,

German Aerospace Center (DLR), Institute of

Communications and Navigation L5 – The New

GPS Signal (2006).

New L5/E5a Acquisition Algorithms: Analysis and

comparison Daniele Borio, C´ecile Mongr´edien,

G´erard Lachapelle University of Calgary (2003).

Digital GPS Signal Generator for L1 Band, Central

Electronics Engineering Research Institute, Council

of Scientific and Industrial Research Pilani-333031,

India, An International Journal (SIPIJ) 3, No.6

(2012) 72.

Tsui, James Bao-Yen, “Fundamentals of Global

Positioning System Receivers: A Software

approach†John Wiley & Sons, Inc. (2000).

E.D. Kaplan, Understanding GPS Principles and

Application, Artech House Publishers (1996).

Mongrédien, G. Lachapelle and M.E. Testing GPS

L5 Acquisition and Tracking Algorithms Using a

Hardware Simulator C.Cannon Position, location

and Navigation Research group Department of

Geomatics Engineering Schulich school of

Engineering University of Calgary (2004).

P. Rinder, N. Bertelsen, Design of a Single

Frequency GPS Software Receiver, M.Sc Thesis,

Aalborg University (2004).

A Software Defined GPS and Galileo Receiver a

Single Frequency Approach by Kai Bore,

Dennis,Nikolag, Peter, Soren Holt (2007).

Real-Time Dual-Frequency (L1/L5) GPS/WAAS

Software Receiver Yu-Hsuan Chen, Jyh-Ching

Juang, National Cheng Kung University, Taiwan

David S. De Lorenzo, Jiwon Seo, Sherman Lo,

Per Enge, Stanford University, U.S.A. Dennis

M. Akos, University of Colorado Boulder, U.S.A.

S.H. Raghavan, M. Shane and R. Yowell, Spread

Spectrum Codes for GPS L5, The Aerospace Corp.,

P.O. Box 92957, Los Angeles, CA90009-2957310-

GPS L5 Software Receiver Development for HighAccuracy Applications by Cécile Mongrédien May

(2008).

Downloads

Published

04-03-2014

How to Cite

[1]
K. Latif, M. Usman, and A. Hanif, “SIMULATION AND ACQUISITION OF GPS L5 FREQUENCY SIGNAL AND COMPARISON WITH L1 SIGNAL”, The Nucleus, vol. 51, no. 1, pp. 29–36, Mar. 2014.

Issue

Section

Articles

Most read articles by the same author(s)

1 2 > >>