SUPER-TWISTING SLIDING MODE CONTROL STRATEGY FOR DYNAMIC VOLTAGE RESTORER TO IMPROVE POWER QUALITY IN POWER DISTRIBUTION SYSTEM

Authors

  • S. Kanwal Department of Electrical Engineering, Wah Engineering College, University of Wah, Wah Cantt, Pakistan
  • A. Hanif Department of Electrical Engineering, Wah Engineering College, University of Wah, Wah Cantt, Pakistan

Abstract

The paper deals with application of super-twisting sliding mode control in Dynamic Voltage Restorer (DVR) to tackle various Power Quality (PQ) issues. The various features of super-twisting sliding mode, which include selection of sliding surface, stability of system, existence of sliding mode and reaching conditions to bring system states on sliding surface, are discussed for mitigation of voltage sag/swell and phase jumps applications. Pulse width modulation (PWM) based second order super-twisting sliding mode control is used to operate voltage source converter (VSC) in voltage control mode for mitigation of voltage sag, voltage swell and phase jumps to regulate power flow to load. The proposed controller design is simulated for single phase DVR. It exhibits robustness to system parameters and load variations. The load voltage Total Harmonic Distortion (THD) is calculated to evaluate the voltage quality. MATLAB®/Simulink® SimPowerSystem tool box is used to check the performance of proposed control strategy. Simulation results show that response time and chattering effect can be minimized with use of super-twisting sliding mode control while keeping the main properties of standard sliding mode control (SMC). The proposed control scheme can compensate voltage sags, voltage swells and phase jumps within 2ms which is reasonably lower than ITIC curve and SEMI-F-47 standard for sensitive loads that suggest a tolerable time limit of 20ms.

References

M. H. J. Bollen, Understanding Power Quality

Problems: Voltage Sags and Interruptions,

New York, IEEE Press (2000).

C. Olarte, J. Gonzalez and J. Perez, Study

and Analysis of Voltage Dips in an Adjustable

Speed Drives, Proceedings of 11th

International Conference on Renewable

Energies and Power Quality, Spain

(April 2010) pp. 319-323.

R.C. Dugan, M.F. McGranaghan, S. Santoso

and H.W. Beaty, Electrical Power Systems

Quality, McGraw-Hill (2004).

J. Wang, S. Chen and T. T. Lie, Estimating

Economic Impact of Voltage Sags,

Proceedings of IEEE International

Conference on Power System Technology,

Singapore (2004) pp. 350-355.

J. Wang, S. Chen and T. T. Lie, IEEE

Transactions on Power Delivery 20, No. 2

(2005) 1738.

P. T. Nguyen and T. K. Saha, Dynamic

Voltage Restorer Against Balanced and

Unbalanced Faults: Modeling and

Simulations, IEEE-School of Information

Technology and Electrical Engineering,

University of Queensland, Australia (2004)

pp. 1-6.

N.H. Woodley, L. Morgan and A. Sundaram,

IEEE Transactions on Power Delivery 14,

No. 3 (1999) 1181.

A. Ghosh and G. Ledwich, Power Quality

Enhancement using Custom Power Devices,

Kluwer Academic Publishers (2002).

S.M. Silva, F. A. Eleuterio, A. D. S. Reis and

B.J.C. Filho, Protection Schemes for a

Dynamic Voltage Restorer, Proceedings of

IEEE Industry Application Conference,

Seattle, Washington, USA (2004) pp. 2239-

A. Pakharia and M. Gupta, International

Journal of Advances in Engineering &

Technology 4, No. 1 (2012) 347

R.H. Salimin and M.S.A. Rahim, Simulation

Analysis of DVR Performance for Voltage

Sag Mitigation, Preceedings of 5th

International Power Engineering and

Optimization Conference (PEOCO2011),

Malaysia (6-7 June 2011) p. 261.

B. Ferdi, C. Benachaiba, S. Dib and

R. Dehini, Journal of Electrical Engineering,

Theory and Application 1, No.3 (2010) 165.

D.D. Chowdary and G.V. Nagesh Kumar,

Indian Journal of Science and Technology 1,

No. 5 (2008) 1.

M.V. Jithesh and P.A. Michael, International

Journal of Engineering and Advanced

Technology 2, No. 2 (2012) 281.

A. Ishigame, T. Furukawa, S. Kawamoto and

T. Taniguchi, IEEE Trans. on Industrial

Electronics 40, No. 1 (1993) 64.

S. Chen, G. Joos, L. Lopes and W. Guo,

A Nonlinear Control Method of Dynamic

Voltage Restorers, Proc. IEEE 33rd Annual

Power Electronics Specialists Conference

(2002) pp. 88- 93.

M.I. Marei, E.F. El-Saadany and M.M.A.

Salama, IEEE Transactions on Power

Delivery 22, No. 4 (2007) p. 2017.

H. Kim and S.K. Sul, IEEE Transactions on

Power Electronics 20, No. 5 (2005) p. 1169.

Vilathgamuwa, Perera, Choi, IEEE Transactions on Power Delivery 18, No. 3 (2003)

A. Levant, International Journal of Control,

Taylor & Francis Ltd. 76, No. 9/10 (2002)

H. Kizmaz, S. Aksoy and A. Muhurcu, Sliding

Mode Control of Suspended Pendulum,

Proceedings of the International Symposium

on Modern Electric Power Systems (MEPS),

Wroclaw (Sept. 2010) pp. 20-22.

A. Levant, International Journal of Control,

Taylor & Francis Ltd. 58, No. 6 (1993) 1247.

W.B. Lin, H.K. Chiang, Artificial Life and

Robotics 16, No. 3 (2011) 307.

S.V. Emel'yanov, S.K. Korovin and A.

Levant, Computational Mathematics and

Modeling 7, No. 3 (1996) 294.

Downloads

Published

29-11-2013

How to Cite

[1]
S. Kanwal and A. Hanif, “SUPER-TWISTING SLIDING MODE CONTROL STRATEGY FOR DYNAMIC VOLTAGE RESTORER TO IMPROVE POWER QUALITY IN POWER DISTRIBUTION SYSTEM”, The Nucleus, vol. 50, no. 4, pp. 395–409, Nov. 2013.

Issue

Section

Articles

Most read articles by the same author(s)

1 2 > >>