CORROSION BEHAVIOUR OF CLADDING MATERIALS OF RESEARCH REACTOR SPENT FUEL DURING WET STORAGE

Authors

  • A. H. Qureshi Materials Division, Directorate of Technology, PINSTECH, P.O. Nilore, Islamabad, Pakistan.
  • N. Hussain Materials Division, Directorate of Technology, PINSTECH, P.O. Nilore, Islamabad, Pakistan.
  • M. Arif Materials Division, Directorate of Technology, PINSTECH, P.O. Nilore, Islamabad, Pakistan.
  • E. Ahmed Materials Division, Directorate of Technology, PINSTECH, P.O. Nilore, Islamabad, Pakistan.
  • M. Akram Materials Division, Directorate of Technology, PINSTECH, P.O. Nilore, Islamabad, Pakistan.
  • N. K. Qazi Materials Division, Directorate of Technology, PINSTECH, P.O. Nilore, Islamabad, Pakistan.

Abstract

The present investigations deal with the study of the effect of water chemistry of spent fuel storage bay on corrosion properties of cladding materials of research reactor. Coupons of four different alloys of stainless steel (SS 316) and aluminium alloys (Al 6063, Al 6061 and Al 1100) in form of discs were assembled on a rack forming galvanic couples and crevice sandwiches. The rack was immersed in the spent fuel storage bay for a period of one year exposure. The monthly inspection of specimens was conducted out based on visual observation and photography. The analyses of water were done on weekly basis. After exposure of one year the rack was withdrawn and disassembled in the laboratory. The surface of each individual coupon was observed visually and by means of optical microscope. Visual observation revealed relatively more deposits of scale on aluminium samples in the galvanic couples compared to stainless steel (SS) samples. In the crevice sandwiches (Al+Al) both upper and lower samples were found almost identical with respect to scale deposits. The microscopic observations showed no pitting on any sample except at selective areas only in contact with ceramic spacers.

References

H.G. Godard, The Corrosion of Light Metall,

Wiley, New York (1967) 3.

H.G. Godard, Mater. Performance 20 (1981)

H.G. Godard, Can. J. Chem. Eng. 38 (1960)

Metals Handbook, ASM International, 9th

edn. Vol. 13, Metals Park, OH (1987) 18.

J. P. Howell, Corrosion/95, Natl Assoc. of

Corrosion Engineers, Houston, TX (1995)

paper 429.

M.G. Fontana, Corrosion Engineering, 3rd

Edn, Megra Hill, New York (1986).

C.A. Hampel, Editor, Encyclopedia of

Electrochemistry, Reinhold, New York (1964)

P. M. Aziz, H. P. Godard, J. Ind. Eng. Chem.

(1952) 1791.

F. C. Porter and S. E. Hadden, J. Appl.

Chem. 3 (1953) 385.

D. E. Davies, J. Appl. Chem. 9 (1959) 651.

L. C. Rowe and M. S. Walker, Corrosion 17

(1961) 105.

M. A. Amin, S. S. Abd El Rehim and E.E.F.

El Sherbini, Electrochimica Acta, 51 (2006)

J P. Howell, Corrosion of aluminum-clad

spent fuel in reactor basin water storage,

Corrosion/96, Natl. Assoc. of Corrosion

Engineers, Houston, TX (1996).

V. Kain, K. Agarwal, P.K. De and P.

Seetharamaih, J. Mat. Eng. Perfom., 9

(2000) 317.

Test Protocol, IAEA-CRP (1995).

M.G. Fontana, N.D. Greene, Corrosion

Engineering, 2nd edition , McGraw-hill,

(1978) p. 9.

H. Bohni and H.H. Uhlig: J. Electrochem.

Soc. 116 (1969) 906.

J.P. Howell and P.E. Zapp. Corrosion 94

Houston, TX, 1 (994) paper No. 118

J.P. Howell, Corrosion 96, Houston, TX,

(1996) paper No. 128.

Downloads

Published

26-06-2020

How to Cite

[1]
A. H. Qureshi, N. Hussain, M. Arif, E. Ahmed, M. Akram, and N. K. Qazi, “CORROSION BEHAVIOUR OF CLADDING MATERIALS OF RESEARCH REACTOR SPENT FUEL DURING WET STORAGE”, The Nucleus, vol. 46, no. 4, pp. 473–478, Jun. 2020.

Issue

Section

Articles

Most read articles by the same author(s)

1 2 3 > >>